> For the complete documentation index, see [llms.txt](https://help.qonic.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.qonic.com/documentation/qonic-application/basics/navigation-and-selection/select-mode.md).

# Select Mode

The default mode for Qonic. Enables selection of products and (sub)entities in your model.

To enable select mode, press <kbd>V</kbd> or click the *Select* button in the bottom toolbar.

<div data-with-frame="true"><figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2F1iWjTLuV8JqqiKOv1HPq%2Fimage.png?alt=media&amp;token=e7eba720-2a6d-44fe-958d-9422c38ada29" alt="" width="236"><figcaption></figcaption></figure></div>

Click the small arrow next to the *Select* button (or press and hold the button) to open the *Select* menu. It lists *Select* (<kbd>V</kbd>), *Navigate* (<kbd>N</kbd>), *Pan*, *Clear selection* (<kbd>Esc</kbd>) and, when the current selection can be deleted, *Delete* (<kbd>Del</kbd>). See [Navigate and Pan Modes](https://help.qonic.com/documentation/qonic-application/basics/navigation-and-selection/navigate-and-pan-modes.md) for the other two modes.

Within selection, Qonic offers two distinct modes: **product selection** and **deep select**.

## Product Selection

The default selection mode allows you to select products in your model. Hovering over a product will highlight its outline in black.

Left-click a product to select it; left-click another product to add it to your selection. Selected products will be indicated with a green outline; the rest of the model will appear slightly transparent and greyed out.

Left-click an already selected product to remove it from your selection.

Press <kbd>Esc</kbd>, or open the menu next to the *Select* button in the bottom toolbar (click the small arrow) and click *Clear selection* to clear your selection.

To select a product that is behind another product from the current camera angle, repeatedly hit the <kbd>Tab</kbd> key to cycle through products behind your cursor. Press <kbd>Shift</kbd> <kbd>Tab</kbd> to go back.

Press <kbd>Ctrl</kbd> <kbd>A</kbd> to select all visible products, grids and survey points in the current scope. This does not work in Deep Select.

With the *Grids* toggle on, click an axis or label of a grid to select the whole grid. Hold <kbd>Ctrl</kbd> and click an axis to select only that axis, see [Grids](https://help.qonic.com/documentation/qonic-application/basics/visualisation-settings/grids.md#modifying-grids).

Use a selection window to select an entire portion of the model view at once: click, hold and drag the left mouse button to create a selection window. A blue selection window (drag from left to right) will select all products that fall completely within the bounded area. A green selection window (drag from right to left) will select all products that fall within the bounded area or cross the edges of the bounded area.

Hold <kbd>Shift</kbd> when you release the mouse button to remove the products in the window from your selection (the window turns red). Hold <kbd>Ctrl</kbd> to select the lowest-level parts instead of whole assemblies.

When working with [assemblies](https://help.qonic.com/documentation/qonic-application/modelling/modifying/assembly-editing.md), there are several ways to select a desired level in the assembly from the model view. To select subassemblies in the model view, double-click to dig one level deeper, triple-click to dig another level deeper and so on. Alternatively, click and hold the left mouse button until you reach the level of the assembly you want to select. While holding, you can also scroll the mouse wheel to step up or down through the levels. Finally, if you are only interested in the lowest level of the assembly, hold <kbd>Ctrl</kbd> and left-click.

## Deep Select

The Deep Select mode allows you to select faces, edges, vertices, bodies, chalk curves, grids and closed boundaries for direct manipulation of the geometry.

To enable Deep Select, click the *Deep Select* icon in the bottom toolbar or hit <kbd>D</kbd>. Press <kbd>D</kbd> or click the icon again to return to product selection. When you turn on Deep Select, a *Deep Select Activated* message sums up these controls; tick *Don't show this again.* to hide it next time.

A black preview of the face, edge or vertex you are about to select will be displayed when hovering the cursor over an entity. A selected face, edge or vertex will be highlighted in green.

To select an entire body, either individually select all its faces and edges **or** hold <kbd>Ctrl</kbd> and left-click the body.

To select a closed boundary on an existing face or on the XY-plane, move your cursor inside that boundary and hit the *Tab* key. The boundary should now be highlighted; left-click to select it. A boundary can be defined by 3D geometry intersecting with the highlighted face, and/or chalk curves drawn on top of this face.

Alternatively, turn on *Boundary Detection* in the bottom toolbar (visible in Deep Select) to highlight boundaries before faces, so you can click a boundary directly. Its tooltip shows the current state: *Boundary* or *Face*.

To select a face or edge that is behind another part from the current camera angle, hit the *Tab* key to cycle through faces and edges behind your cursor.

Use a selection window to select multiple bodies, faces, edges, chalk curves or grids at once: click, hold and drag the left mouse button to create a selection window. A blue selection window (drag from left to right) will select all entities that fall completely within the bounded area. A green selection window (drag from right to left) will select all entities that fall within the bounded area or cross the edges of the bounded area. Use the <kbd>Tab</kbd> key while dragging to cycle between bodies, faces, edges, chalk curves and grids. The *Box Select* header above the bottom toolbar shows which type the window will select. Hold <kbd>Shift</kbd> when you release the mouse button to remove the entities from your selection instead. If the window would select a very large set, Qonic asks you to confirm (*Large Selection Set*); click *Select anyway* to continue.

<div data-with-frame="true"><figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FtWiJ0niEreSkO7VJsMBN%2Fimage.png?alt=media&amp;token=6cb26441-5bfe-4dc8-8482-937d9735cd9a" alt=""><figcaption></figcaption></figure></div>

## Input methods

### Mouse

Use the following gestures for navigation and selection when using a mouse.

<div data-with-frame="true"><figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FV6hUnfEaiYWwtNkk1dF7%2FMouse.jpg?alt=media&amp;token=75fdb224-64be-425e-bc6e-9f556e4aaf84" alt=""><figcaption></figcaption></figure></div>

### Touch Screen

Use the following gestures for navigation and selection when using a touch screen.

<div data-with-frame="true"><figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2F9kOgQSrArjXUfx24AAi0%2FTouch.jpg?alt=media&amp;token=b3d5f6a9-d173-4296-a049-ac7330904d46" alt=""><figcaption></figcaption></figure></div>

### Trackpad

Use the following gestures for navigation and selection when using a trackpad.

<div data-with-frame="true"><figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FCW5Su9TMwOjzEAkr5lcc%2FTrackpad.jpg?alt=media&amp;token=c3aed2ea-5123-46c2-bc0e-35b13cd98cf8" alt=""><figcaption></figcaption></figure></div>
