> For the complete documentation index, see [llms.txt](https://help.qonic.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.qonic.com/documentation/qonic-application/measure-and-quality/ids-validation.md).

# IDS Validation

Check all loaded models against Information Delivery Specifications (IDS) by uploading an .ids file.

{% embed url="<https://qonic.wistia.com/medias/iwa5q4j7jg>" %}

{% hint style="info" %}
IDS Validation is in beta, as shown by the β tag next to the tool. It is part of the Coordination add-on: without this add-on, the tool is greyed out and shows a bolt icon. The sample project and your organization's first project include all add-ons. See [Plans & Add-ons](/getting-started/plans-and-add-ons.md#add-ons). IDS Validation is not available in public sharing sessions or on mobile devices. Read-only members can use the tool too.
{% endhint %}

1. Under *Measure*, open *Quality* and click *IDS Validation*
2. In the Command Center, click the *Click to upload IDS file* button
3. Select an .ids file from your desktop. The file must follow the IDS 1.0 standard. The file name appears on the button, and you can remove the file with the trash icon. If the file is not a valid IDS file, *Failed to load* followed by the file name is shown.
4. Press *Enter* or click the *Apply* button.

The check runs on all models loaded in the project. For each specification that fails, a notification appears in the top-right corner, with the name and description of the specification. It lists every product that failed, with the reason. Click the notification to select all of these products, or click one line to select and zoom to that product. If the failure is on a library item, such as a material, the [Libraries Panel](/documentation/qonic-application/data-and-collaboration/libraries-panel.md) opens on that item instead. If all checks pass, the notification says *No issues found.*

To turn a failed check into an [issue](/documentation/qonic-application/data-and-collaboration/issues-panel.md), hover it and click the issues icon (*Raise Issue*). To create issues for all failures of a specification at once, click the issues icon with the number in the notification header (*Raise all Issues*).
