> For the complete documentation index, see [llms.txt](https://help.qonic.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.qonic.com/documentation/qonic-application/measure-and-quality/measure.md).

# Measure

Measure the shortest or vertical distance or the angle between objects or their faces, edges and vertices, the length of a path of points, or the lowest and highest level of a selection.

Under the *Measure* icon, click *Measure.* The command center groups the measurement modes under *Objects* (*Shortest*, *Vertical*, *Angle* and *Height*) and *Points* (*Straight* and *XYZ*). By default, *Shortest* (under *Objects*) is active.

Select two entities in the model. The shortest distance between these entities will be displayed. The result is also shown in the command center, as *Distance*. If two entities are already selected when you open the tool, they are measured right away.

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FZENwgCXjpsCRqCDHz7GI%2Fimage.png?alt=media&amp;token=f519af09-d590-485f-ad12-748160c3eb73" alt="" width="375"><figcaption></figcaption></figure>

Click *Vertical* (under *Objects*) in the command center. Now the shortest vertical distance between the two selected entities will be displayed, and shown in the command center as *Distance*. If the two entities overlap in height, the vertical distance is 0.

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2F6m6hBC7MWgLYBmE5nYNW%2Fimage.png?alt=media&amp;token=06218829-9919-43c2-9540-a5ca91a751fa" alt="" width="375"><figcaption></figcaption></figure>

Select another entity. This new entity will now be checked against the entity you selected *last*. You can not have more than two entities selected during this procedure, so the first selected entity will automatically be unselected.

It is also possible to measure the shortest distance between *sub*entities, i.e. faces, edges and vertices. To do this, enable [Deep Select](https://help.qonic.com/documentation/qonic-application/basics/navigation-and-selection/select-mode.md#deep-select) mode and click the bodies, faces, edges and/or vertices you want to measure the distance between. Your selection can be a mix of any of these (sub)entities.

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2F2eY6pGgbGT6E10ZXVFTs%2Fimage.png?alt=media&amp;token=c6f23018-ebfc-4cdb-b5ef-5d208af1d9e2" alt="" width="375"><figcaption></figcaption></figure>

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FyYZYYdvdCg8GassADRFg%2Fimage.png?alt=media&amp;token=9f21d19d-ab7d-4af4-940e-aabab59a3f08" alt="" width="341"><figcaption></figcaption></figure>

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FZ5kGzwYosc0jDwp3ijTa%2Fimage.png?alt=media&amp;token=6f6805a6-7171-459a-9520-e54e02052e64" alt="" width="375"><figcaption></figcaption></figure>

Clicking *Angle* (under *Objects*) will display the angle between two planar faces, two linear edges or a face and an edge. The command center shows the result as *Angle*, in degrees rounded to one decimal. This mode only works with faces and edges, so Deep Select will be automatically enabled.

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2Fwklp1L3OuJRh2Gk6lep2%2Fimage.png?alt=media&amp;token=95b35da0-995f-4410-b924-3c920aa9e848" alt="" width="375"><figcaption></figcaption></figure>

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FQqj1cKu1CJykuN265KLo%2Fimage.png?alt=media&amp;token=d340a52f-2c13-4fa9-985f-d870cb251684" alt="" width="317"><figcaption></figcaption></figure>

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FI8UfLbLBXIrQ7gLJdUge%2Fimage.png?alt=media&amp;token=7ec7a093-7ea6-4977-9bef-4ce43b6fe3fb" alt="" width="375"><figcaption></figcaption></figure>

Enabling the *Height* option will display the lowest and highest level of your selection, as the Z coordinates **Lowest Z** and **Highest Z**. Unlike the other options, Height works on any number of selected entities: the measurement always covers the whole selection. In the model, a marker beside the selection indicates each level. To measure the levels of specific faces, edges or vertices instead of whole entities, enable [Deep Select](https://help.qonic.com/documentation/qonic-application/basics/navigation-and-selection/select-mode.md#deep-select) mode.

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2Fde4lpA8Kj4Z4mK13wt70%2Fimage.png?alt=media&amp;token=a6de5cde-eee6-4c2b-9cc1-ff2cc899730d" alt="" width="563"><figcaption></figcaption></figure>

Click *Straight* (under *Points*) to measure along points: click or drag to add points anywhere in the model and find the shortest distance between these points. Click more points to add this to the chain and find the respective distances as well as angles between two subsequent sets of points. Points snap to the model geometry and to earlier points of the path, so you can close a loop. The total length of the path is shown in the command center, as *Total length*. Press <kbd>Esc</kbd> to clear the path and start a new one.

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2Fkf6CEe9tcoX4Y5YdCmAY%2Fimage.png?alt=media&amp;token=6272f2b5-e44d-4355-9b0b-d4ef3516b3f5" alt="" width="375"><figcaption></figcaption></figure>

Click *XYZ* (under *Points*) to break down these distances in their X, Y and Z components. The command center shows the total ΔX, ΔY and ΔZ of the path; a step in the negative direction counts as negative.

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FJL8jLl5o362PpIw3Halb%2Fimage.png?alt=media&amp;token=3654b9ed-6e22-45f5-9945-fba4188d720e" alt="" width="375"><figcaption></figcaption></figure>

{% hint style="info" %}
Distances are displayed in the length unit of the project, and angles in degrees. Project owners can change the length unit in the [project units](https://help.qonic.com/documentation/qonic-dashboard/projects.md#project-units).
{% endhint %}
