> For the complete documentation index, see [llms.txt](https://help.qonic.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.qonic.com/documentation/qonic-application/measure-and-quality/quantify.md).

# Quantify

Use this tool to measure quantities of parts in your model.

1. Under the *Measure* icon, click *Quantify*. Parts you already selected are used; otherwise select the part(s) you want to take some measurements from
2. In *Choose measurement*, pick a calculator
3. (optional) For Custom Area, Custom Volume and Surface Area, change the settings
4. Click *Calculate*

Quantify always selects whole parts. *Calculate* stays disabled until at least one part is selected and a calculator is chosen.

The result will be displayed, and the measured quantity will be indicated as a blue overlay over the selected parts, to provide visual feedback. The rest of the model becomes transparent. The result is one total for all selected parts, rounded to two decimals; click the copy icon next to it to copy the value. Select other parts or press <kbd>Esc</kbd> to start a new measurement.

{% hint style="info" %}
If a quantity cannot be calculated for some of the selected parts, those parts are highlighted in red and the message *Failed to calculate … for some entities* appears; the result only includes the other parts. If your device runs low on memory, the message *There is not enough memory available to calculate quantities.* appears.
{% endhint %}

Currently the following calculators are supported: Count, Area (Net, Gross, Custom), Surface Area, Volume (Net, Gross, Custom), Length, Perimeter and Height.

{% hint style="info" %}
Results are displayed in the length, area and volume units of the project. Project owners can change these in the [project units](https://help.qonic.com/documentation/qonic-dashboard/projects.md#project-units). The examples on this page use metric units.
{% endhint %}

Let's take a closer look at the different calculators using the following wall as an example. The wall contains two large openings and three smaller openings.

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FqhU9Z5wJFVxBaT6yf1cW%2FScreenshot%202025-04-03%20161038.png?alt=media&amp;token=03e4d05d-aa94-44c6-8386-d46a005e24e9" alt="" width="563"><figcaption></figcaption></figure>

## Count

The Count calculator will return the count of products you have selected. In this case we have one wall selected, so the resulting count is 1.

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2F7wy0cZkh6AFdhIvQonNN%2FScreenshot%202025-04-03%20161051.png?alt=media&amp;token=7a2c5a13-d951-4caf-8b3e-9aed806887d9" alt="" width="563"><figcaption></figcaption></figure>

## Area

The Area calculators work best for planar objects such as walls, slabs and roofs. The main faces (i.e. the two faces that are larger relative to the other faces) will be automatically detected and the area in the middle between these two faces will be calculated. For [spaces](https://help.qonic.com/documentation/qonic-application/basics/visualisation-settings/spaces.md), the Area calculators return the horizontal floor area of the space.

The **Net Area** calculator will return the area of the selected product(s), with all openings subtracted. In our example all 5 openings are subtracted from the total area, resulting in an area of 20.32 m².

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2Frhg151J4mwPogSswB8Xa%2FScreenshot%202025-04-03%20161059.png?alt=media&amp;token=6fc30e75-7a18-4636-b614-c6e141223438" alt="" width="563"><figcaption></figcaption></figure>

The **Gross Area** calculator will return the area of the selected product(s), ignoring all openings and features. In our example all 5 openings are ignored, resulting in an area of 25.53 m².

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FRwzKUGdlaK435uE5Btb8%2FScreenshot%202025-04-03%20161106.png?alt=media&amp;token=117ef6c2-aed1-4960-b2f6-9d264d0962ab" alt="" width="563"><figcaption></figcaption></figure>

The **Custom Area** calculator will return the area of the selected product(s), ignoring all openings smaller than a specified area. Turn on *Ignore voids smaller than* and enter the area; with the switch off, the result is the same as Net Area. In our example the three openings smaller than 0.5 m² are ignored, resulting in an area of 20.35 m².

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FXV12YlncK8VZ9fLnlGRD%2FScreenshot%202025-04-03%20161121.png?alt=media&amp;token=28852380-a498-4b7c-9b9c-2cae75176e90" alt="" width="563"><figcaption></figcaption></figure>

## Surface Area

The **Surface Area** calculator lets you distinguish between the main faces, feature faces and other faces. For planar objects such as walls, slabs and roofs, the main faces are the two faces that are relatively larger than the other faces. For linear objects such as beams, columns, pipes or ducts, the main faces are faces except for the end faces and feature faces. Feature faces are faces pertaining to openings, recesses and other irregularities in the selected part.

Under *Measure*, turn on one or more of *main faces*, *feature faces* and *other faces* (by default only *main faces* is on). The surface area of all turned-on face types is added up.

In the example below, only the surface area for the two main faces is calculated, taking into account all openings leading to a surface area of 40.64 m².

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FNGJfqz9OTAokP4uFcjlD%2FScreenshot%202025-04-03%20161138.png?alt=media&amp;token=60c97664-15f6-4323-b87b-521420b08f1b" alt="" width="563"><figcaption></figcaption></figure>

When only *feature faces* is turned on, we can clearly see the different features highlighted. In this case these features have a combined surface area of 2.58 m².

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FZRnAZ6ryZ8imQHH7jTac%2FScreenshot%202025-04-03%20161150.png?alt=media&amp;token=51d1a5b0-76c8-438f-b627-573160fe3642" alt="" width="563"><figcaption></figcaption></figure>

Finally, the other faces in this case are the top, bottom and end faces of the wall, with a total surface area of 4.13 m².

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FUctztjOkasRmTA51Eph1%2FScreenshot%202025-04-03%20161157.png?alt=media&amp;token=cf391adf-275d-4b7e-9ce2-12cbc273d7b5" alt="" width="563"><figcaption></figcaption></figure>

In this calculator it is also possible to ignore voids smaller than a specified area: turn on *Ignore voids smaller than* and enter the area. The main faces of this wall would be defined as follows:

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FIzYkKfQ0LphinNeWsnRR%2FScreenshot%202025-04-03%20161210.png?alt=media&amp;token=83c4d44d-437b-435f-934e-336b7a542793" alt="" width="563"><figcaption></figcaption></figure>

When ignoring small voids, the feature faces of this wall are defined as follows:

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FSNeyprOEe8WXggf1RJzU%2FScreenshot%202025-04-03%20161218.png?alt=media&amp;token=a1213207-bcf2-4f9e-b777-bfa9e7308129" alt="" width="563"><figcaption></figcaption></figure>

## Volume

The **Net Volume** calculator will return the volume of the selected product(s), taking into account all openings and features. In our example all 5 openings are subtracted from the total volume, resulting in a volume of 3.96 m³.

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FO7bwnziwrx4HlKdrrtgh%2FScreenshot%202025-04-03%20161231.png?alt=media&amp;token=cf2abb23-41f6-4f82-8cb4-6fec669c1f7f" alt="" width="563"><figcaption></figcaption></figure>

The **Gross Volume** calculator will return the volume of the selected product(s), ignoring all openings and features. In our example all 5 openings are ignored, resulting in a volume of 4.98 m³.

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2FwgcGyboZJCRtgpnkmXkw%2FScreenshot%202025-04-03%20161241.png?alt=media&amp;token=fd8ff984-0cd0-49c5-abb5-070c83ecd4c8" alt="" width="563"><figcaption></figcaption></figure>

The **Custom Volume** calculator will return the volume of the selected product(s), ignoring all openings and other voids (such as recesses) smaller than a specified area. Turn on *Ignore voids smaller than* and enter the area; with the switch off, the result is the same as Net Volume. In our example the three openings smaller than 0.5 m² are ignored, resulting in a volume of 3.97 m³.

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2Fwtp4uQWu5SJf5SDmiAJv%2FScreenshot%202025-04-03%20161250.png?alt=media&amp;token=33ae021d-ef34-4be9-ada0-bd3573696728" alt="" width="563"><figcaption></figcaption></figure>

## Length

The **Length** calculator will return the length of the selected products; this calculator works best for products that are larger in one dimension relative to the other dimensions, such as beams, columns, pipes and ducts. For reinforcing bars, it returns the total length along the bar, including bends.

In our example the Length calculator returns the length of the wall of 7977 mm. A blue line indicates how this measurement was taken.

<figure><img src="https://929210962-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZKeCFTBZzqUt4lpmhUdS%2Fuploads%2F2FWXq1gi4P412pRSLpup%2FScreenshot%202025-04-03%20161258.png?alt=media&amp;token=9e7f6942-6766-4d00-8cbb-050e97c098da" alt="" width="563"><figcaption></figcaption></figure>

## Perimeter

The **Perimeter** calculator returns the length of the outline of the selected product(s), measured on the surface halfway between the main faces; openings are not included. It works best for planar products such as slabs and walls.

## Height

The **Height** calculator returns the vertical height of the selected product(s). For windows and doors, it returns the height of the window or door itself.
