> For the complete documentation index, see [llms.txt](https://help.qonic.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.qonic.com/documentation/qonic-application/modeling/modifying/copy-and-pasting-details.md).

# Copy & Pasting Details

{% embed url="<https://qonic.wistia.com/medias/qmjswwsbu9>" %}

Use this tool copy details from one window or door to other windows or doors. The details should **not** be defined inside the window or door assembly - they should be separate products, within close proximity of the door or window. Typical examples may include a sill, lintel, separate framing objects or wall finishes inside the window reveals.&#x20;

These objects may be manufactured, installed, quantified, ... by *separate* stakeholders. To avoid a combinatorial explosion of possible configurations of window types, sill types, lintel types..., the objects should be allowed to be modelled separately. For easy propagation of such details to other windows/doors in your project, the Copy/Paste Details tool can be used.

#### Copy Details

1. Under the *Detail* icon, click *Details > Copy Details*
2. Click a window/door that has context or details surrounding it. These details should be **separate** objects from the window/door. The window/door will be highlighted in green; if any details are automatically detected they will highlighted in blue.
3. (optional) add or remove details to your selection set by left-clicking them.
4. Press Enter. The details are now copied to your clipboard.

#### Paste Details

{% hint style="warning" %}
The Paste Details tool is only available if there are valid items on the clipboard, see Copy Details.
{% endhint %}

1. Under the *Detail* icon, click *Details > Paste Details*
2. Click one or more windows/doors you wish to paste these details *to*
3. Press *Enter*. A preview of the details applied to the selected windows/doors will be shown
4. (optional) Left-click any of the windows/doors to flip the orientation of the detail, should it not be correct
5. Press *Enter*. The details are now applied.