# Mirror {% embed url="" %} 1. Under *Modify*, click *Mirror* 2. (optional) Enable [Deep Select](/documentation/qonic-application/basics/navigation-and-selection/selection-modes.md#deep-select) mode if you wish to mirror bodies instead of entire parts 3. Click the parts or bodies you wish to mirror and press *Enter* 4. Click the face around you wish to mirror, or a face parallel to it 5. (optional) Use the manipulator to move the mirror plane to the correct location 6. Press *Enter* to confirm. The selection is mirrored and copied. --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://help.qonic.com/documentation/qonic-application/modeling/modifying/mirror.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.