> For the complete documentation index, see [llms.txt](https://help.qonic.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.qonic.com/documentation/qonic-application/modelling/creating/loft.md).

# Loft

Create new 3D geometry by lofting between two or more profiles.

{% embed url="<https://qonic.wistia.com/medias/s1a00p545i>" %}

The Loft tool lets you create a new body as a smooth transition between two or more 2D profiles.

1. In the toolbar, open the *3D Creation* menu and click *Loft*
2. Click a [face or boundary](https://help.qonic.com/documentation/qonic-application/basics/navigation-and-selection/select-mode.md#deep-select) you want to start the Loft operation from
3. Click a second face or boundary you want to connect with the first one
4. (optional) click additional faces or boundaries to be included in the Loft.
5. Press Enter or left-click anywhere on the screen to accept.

The loft is added to the active model as a new Building Element Proxy. There is no preview: the result appears when you accept.

{% hint style="info" %}
Profiles must be planar. A profile can have at most one hole, and all profiles must have the same number of holes.
{% endhint %}

{% hint style="warning" %}
When lofting more than 2 profiles, the order in which the profiles are selected matters!
{% endhint %}

{% hint style="warning" %}
Lofting paths/rails are currently not yet supported.
{% endhint %}
