> For the complete documentation index, see [llms.txt](https://help.qonic.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.qonic.com/documentation/qonic-application/modelling/creating/sweep.md).

# Sweep

Create new 3D geometry by sweeping a 2D profile along a path

{% embed url="<https://qonic.wistia.com/medias/si64qh8smh>" %}

The Sweep tool lets you create a new body by extending a 2D profile along a predefined or custom path.

1. In the toolbar, open the *3D Creation* menu and click *Sweep*.
2. Highlight the planar [face or boundary](https://help.qonic.com/documentation/qonic-application/basics/navigation-and-selection/select-mode.md#deep-select) you want to start the Sweep operation from (one profile per sweep). The manipulator, represented by a small sphere, will be displayed at your cursor.
3. On this face or boundary, drop the manipulator on desired anchor point. This point determines the profile's alignment relative to the path.
4. Define the sweep path. In the command center, set *Sweep Mode* to *Follow* (default) or *Manipulator*:
   1. *Follow*:
      1. select an existing edge or chalk curve, **or**
      2. drag the manipulator handle to manually create a new sweep path
      3. (optional) rotate the profile around the first sweep path segment, by interacting with the circle segment displayed at the manipulator
      4. Add more sweep path segments by clicking adjacent edges or further dragging the manipulator.
   2. *Manipulator*:
      1. (optional) Rotate the profile around the first sweep path segment, by interacting with the circle segment displayed at the manipulator
      2. drag the manipulator handle to start sweeping perpendicular to the sweep profile
      3. interact with the manipulator circle segments to rotate the direction of the sweep path and create new path segments
5. Press Enter or click *Apply*. In *Follow* mode, you can also click an empty spot in the view.

The sweep is added to the active model as a new Building Element Proxy.

{% hint style="info" %}
Only connected or 'chained' edges/curves can be selected as subsequent sweep path segments.
{% endhint %}
