> For the complete documentation index, see [llms.txt](https://help.qonic.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.qonic.com/documentation/qonic-application/modelling/modifying/subtract.md).

# Subtract

Subtract the geometry of one selection set from another.

{% embed url="<https://qonic.wistia.com/medias/h2icx9h753>" %}

1. In the toolbar, open the *Boolean* menu and click *Subtract*, or use the <kbd>X</kbd> shortcut
2. Select the parts you wish to modify, these will be highlighted in green. When ready, press Enter
3. Select the parts you wish to subtract from the first selection set, these will be highlighted in blue. When ready, press Enter or click *Apply*

You can also select bodies in [Deep Select](https://help.qonic.com/documentation/qonic-application/basics/navigation-and-selection/select-mode.md#deep-select) mode, but both selection sets must be parts or both must be bodies. Tessellated geometry can't be used.

The parts you subtract stay in the model; hide or delete them if you no longer need them.

> **Hint:** You can use the Browse panel to assist with the selection of either selection set.
